Design And Build The Appropriate Technology Machinery For Shredded Fish Processing
Abstract
The Shredded fish is produced by machines automatically, which can facilitate the production process. Previously the process was done conventionally in one production run. This problem prompted researchers to create a machine by combining three tool systems to become a shredded fish processing machine, including a system for separating meat and fish bones, a cooking furnace system, and a shredded dryer/spinner system that can be controlled electrically in the production process, in addition to the shredded produced more cleanly and efficiently in one production process. This machine utilizes the power of an electric motor of ¾ Hp, which is the driving force for the meat separator machine with a rotation speed of 2840 rpm and a production capacity of 30 Kg/hour.
References
R. S. Sundari, A. Kusmayadi, and D. S. Umbara, “The Added Value Of Shredded Lele And Patin Catfish,” J. Pertan. Agros, vol. 19, no. 1, pp. 45–54, 2017, Accessed: Mar. 08, 2023. [Online]. Available: http://e-journal.janabadra.ac.id/index.php/JA/article/view/400.
Y. Chen et al., “The Status of Implementation of Good Manufacturing Practices (GMP) Shredded Fish Production in UMKM Az-Zahrah, Makassar,” IOP Conf. Ser. Earth Environ. Sci., vol. 101, no. 1, p. 012040, Dec. 2017, doi: 10.1088/1755-1315/101/1/012040.
L. D. Mahalia and J. Ramadhani, “The utilization of shredded snakehead fish in an effort to prevent stunting in children in Palangka Raya,” Linguist. Cult. Rev., vol. 6, no. S4, pp. 174–181, May 2022, doi: 10.21744/LINGCURE.V6NS5.2182.
E. Marsubari et al., “Pembuatan Dan Pengujian Alat Fish Meat Bone Separator Dengan Kapasitas 60 Kg/Jam,” J. Ilm. Tek. MESIN, vol. 9, no. 2, pp. 62–72, Aug. 2021, doi: 10.33558/JITM.V9I2.2656.
B. B. Sedayu, I. M. S. Erawan, and P. Wullandari, “Preparasi Ikan Kuniran (Upeneus sulphureus) pada Proses Pemisahan Daging Menggunakan Meat Bone Separator,” J. Pascapanen dan Bioteknol. Kelaut. dan Perikan., vol. 10, no. 1, pp. 83–89, Jun. 2015, doi: 10.15578/JPBKP.V10I1.247.
J. P. Usuga Cadavid, S. Lamouri, B. Grabot, R. Pellerin, and A. Fortin, “Machine learning applied in production planning and control: a state-of-the-art in the era of industry 4.0,” J. Intell. Manuf., vol. 31, no. 6, pp. 1531–1558, Aug. 2020, doi: 10.1007/S10845-019-01531-7/FIGURES/23.
S. Siswadi, S. Riyadi, and W. Nugroho, “Penerapan Mesin Teknologi Tepat Guna Penggiling Bumbu Pecel Kapasitas 5 Kg/Jam Bagi UMKM Sambi Kerep Surabaya,” Pengabdi. Masy. dan Inov. Teknol., vol. 1, no. 02, pp. 47–52, Oct. 2022, doi: 10.38156/DIMASTEK.V1I02.32.
S. H. H. Kusumo, S. Siswadi, and G. Setyono, “Pemberdayaan Mesin Teknologi Tepat Guna Pembuat Dan Pengering Mie Pipih Berkapasitas 5kg/Jam Untuk Peningkatan Produksi UKM Di Gresik,” Pengabdi. Masy. dan Inov. Teknol., vol. 1, no. 01, pp. 23–28, Apr. 2022, doi: 10.38156/DIMASTEK.V1I01.19.
R. Agustin et al., “Rancang Bangun Alat Purifikasi Gas Buang Pirolisis Dengan Sistem Absorber Dan Adsorber Kontinyu,” J. Syst. Eng. Technol. Innov., vol. 1, no. 02, pp. 71–76, Oct. 2022, doi: 10.38156/JISTI.V1I02.29.
Y. M. Prasetyo, S. Budiarto, M. P. Perdana, and S. Siswadi, “Rancang Bangun Ulang Motor Listrik Berbasis Android Dengan Sistem Motor Brushless Direct Current (BLDC) 3 Phase Kapasitas 1000 Watt,” J. Syst. Eng. Technol. Innov., vol. 1, no. 01, pp. 13–18, Apr. 2022, doi: 10.38156/JISTI.V1I01.11.
A. R. Dewananta, R. A. Rahmadhani, D. M. Fantoja, M. Muharom, and G. Setyono, “Rancang Bangun Rombong Listrik Dengan Menggunakan Pembangkit Listrik Tenaga Surya (PLTS) Kapasitas 200 Watt,” J. Syst. Eng. Technol. Innov., vol. 1, no. 01, pp. 1–6, Apr. 2022, doi: 10.38156/JISTI.V1I01.9.
H. Siswanto, S. Riyadi, and I. Muhandhis, “Pemanfaatan Teknologi Tepat Guna Mesin Abon Kapasitas 25 Kg/ Jam Untuk Peningkatan Produksi UKM Di Sidoarjo,” Pengabdi. Masy. dan Inov. Teknol., vol. 1, no. 01, pp. 17–22, Apr. 2022, doi: 10.38156/DIMASTEK.V1I01.18.
Copyright (c) 2023 Heru Siswanto, Slamet Riyadi, Siswadi Siswadi, Gatot Setyono, Dwi Khusna, Wahyu Nugroho
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2022 JISTI
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright aims to protect the specific way the article has been written to describe an experiment and the results. JISTI is committed to its authors protecting and defending their work and their reputation and takes allegations of infringement, plagiarism, ethical disputes, and fraud very seriously. JISTI is published under the terms of Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Authors retain the copyright and grant the journal right of first publication (online) with the work simultaneously. We use the restrictive license (non-commercial) as follows:
- BY (attribution): Users are allowed to share, distribute and redistribute the published article in any medium or format, with an identification of the authors and its initial publication in this journal. Authors are encouraged to post and distribute their articles immediately after publication (e.g., institutional or public repositories, personal websites). Authors are allowed to enter into additional contractual arrangements for the non-exclusive distribution of the published and an acknowledgement of its initial publication in this journal.
- NC (non-commercial): Users are not allowed to use the article commercially without the permission of the authors. Authors agree explicitly that the published article is indexed worldwide in databases, repositories and indexation services, even if these services operate on a commercial basis. Authors grant JISTI explicitly the right to include the published articles in databases, repositories and indexation services. You can see examples of personal and commercial use on this link.
.png)
3.png)
4.png)
2.png)
