Analysis Of The Design And Construction Of A Water Spinach (Ipomoea Aquatica) Vegetable Drying Chamber With A Spiral Type Heater
Abstract
The food drying process is an innovative method to change the process of reducing the water content of fresh food products of plant origin to slow down the emergence and growth of unwanted microorganisms. This heating system has four heating elements, where the heating elements used have a power of 1200W because each heating element has a power of 300W. During the drying process, it is known that the average air temperature in the drying room is higher when using solar energy compared to a heating system. The average temperature measurement during the day is 38°C. The measurement results tend to be constant, with an average of 34°C for 7 hours using the heating system. The battery voltage shows an increase every hour. At 08:30 am the battery voltage was 12.3V, and until 16.00 the voltage was 13.57V. This dryer is sourced from solar energy because using solar for drying requires a longer time, namely 8 hours (08.30-16.00), compared to using a heating system for 7 hours.
References
N. Annisa Yuliasdini et al., “Efisiensi Termal Alat Pengering Tipe Tray Dryer Untuk Pengeringan Silika Gel Berbasis Ampas Tebu,” Pros. Semin. Mhs. Tek. Kim., vol. 1, no. 1, pp. 29–33, Nov. 2020, Accessed: Mar. 20, 2024. [Online]. Available: https://jurnal.polsri.ac.id/index.php/psmtk/article/view/2689.
S. Yuliati et al., “Rancang Bangun Tray Dryer Sistem Hybrid (Surya-Heater) Untuk Pengeringan Ikan Asin,” KINETIKA, vol. 11, no. 2, pp. 10–18, 2020, Accessed: Mar. 20, 2024. [Online]. Available: https://jurnal.polsri.ac.id/index.php/kimia/article/view/3084.
E. Z. R. Hakim, H. Hasan, and S. Syukriyadin, “Perancangan Mesin Pengering Hasil Pertanian Secara Konveksi dengan Elemen Pemanas Infrared Berbasis Mikrokontroler Arduino Uno dengan Sensor DS18B20,” J. Komputer, Inf. Teknol. dan Elektro, vol. 2, no. 3, p. 2017, Sep. 2017, Accessed: Mar. 20, 2024. [Online]. Available: https://jurnal.usk.ac.id/kitektro/article/view/8325.
D. Yustianto, S. Riyadi, and S. Siswadi, “Utilization of infrared heating innovation in a 25 Kg Capacity Satay Grilling Machine for MSMEs in Benowo District West Surabaya,” Pengabdi. Masy. dan Inov. Teknol., vol. 2, no. 02, pp. 115–120, Oct. 2023, doi: 10.38156/DIMASTEK.V2I02.60.
I. Muhandhis, M. R. N. Ichsan, F. Fernando, M. R. Rizqi, O. A. W. Riyanto, and A. S. Ritonga, “Clover Leaf Drying Efficiency Using a Drying Machine with a Solar Cell,” Pengabdi. Masy. dan Inov. Teknol., vol. 2, no. 02, pp. 108–114, Oct. 2023, doi: 10.38156/DIMASTEK.V2I02.59.
U. Usman, A. Muchtar, U. Muhammad, and N. Lestari, “Purwarupa dan Kinerja Pengering Gabah Hybrid Solar Heating dan Photovoltaic Heater dengan Sistem Monitoring Suhu,” J. Tek. Elektro, vol. 12, no. 1, pp. 24–32, Jun. 2020, doi: 10.15294/JTE.V12I1.24028.
P. K. Jangde, A. Singh, and T. V. Arjunan, “Efficient solar drying techniques: a review,” Environ. Sci. Pollut. Res., vol. 29, no. 34, pp. 50970–50983, Jul. 2022, doi: 10.1007/S11356-021-15792-4/METRICS.
T. N. Sandeep, B. B. Channabasamma, T. N. Gopinandhan, and J. S. Nagaraja, “The effect of drying temperature on cup quality of coffee subjected to mechanical drying,” J. Plant. Crop., vol. 49, no. 1, pp. 35–41, May 2021, doi: 10.25081/JPC.2021.V49.I1.7059.
M. Zheplinska, M. Mushtruk, V. Vasyliv, N. Slobodyanyuk, and Y. Boyko, “The Main Parameters of the Physalis Convection Drying Process,” Lect. Notes Mech. Eng., pp. 306–315, 2021, doi: 10.1007/978-3-030-77823-1_31/COVER.
S. Fang, R. Wang, H. Ni, H. Liu, and L. Liu, “A review of flexible electric heating element and electric heating garments,” J. Ind. Text., vol. 51, no. 1, pp. 101S-136S, Jun. 2022, doi: 10.1177/1528083720968278/ASSET/IMAGES/LARGE/10.1177_1528083720968278-FIG11.JPEG.
H. Siswanto, S. Riyadi, S. Siswadi, G. Setyono, D. Khusna, and W. Nugroho, “Design And Build The Appropriate Technology Machinery For Shredded Fish Processing,” J. Syst. Eng. Technol. Innov., vol. 2, no. 01, pp. 106–110, Apr. 2023, doi: 10.38156/JISTI.V2I01.38.
A. R. Dewananta, R. A. Rahmadhani, D. M. Fantoja, M. Muharom, and G. Setyono, “Rancang Bangun Rombong Listrik Dengan Menggunakan Pembangkit Listrik Tenaga Surya (PLTS) Kapasitas 200 Watt,” J. Syst. Eng. Technol. Innov., vol. 1, no. 01, pp. 1–6, Apr. 2022, doi: 10.38156/JISTI.V1I01.9.
M. H. Abdullah, O. Purnamayudhia, A. Hindratmo, and C. W. Octavia, “Peningkatan Kompetensi Menggambar Teknik Siswa SMK-SMA dengan AutoCad Di Surabaya-Gresik,” Pengabdi. Masy. dan Inov. Teknol., vol. 2, no. 01, pp. 84–90, Apr. 2023, doi: 10.38156/DIMASTEK.V2I01.46.
A. W. Nugroho, S. Riyadi, S. Siswadi, G. Setyono, and W. Nugroho, “Application Of Appropriate Technology Automation Systems For Making Martabak Manis Machine For Capacity Building In MSMEs In The Gresik Region,” Pengabdi. Masy. dan Inov. Teknol., vol. 2, no. 01, pp. 60–65, Apr. 2023, doi: 10.38156/DIMASTEK.V2I01.42.
S. H. H. Kusumo, S. Siswadi, and G. Setyono, “Pemberdayaan Mesin Teknologi Tepat Guna Pembuat Dan Pengering Mie Pipih Berkapasitas 5kg/Jam Untuk Peningkatan Produksi UKM Di Gresik,” Pengabdi. Masy. dan Inov. Teknol., vol. 1, no. 01, pp. 23–28, Apr. 2022, doi: 10.38156/DIMASTEK.V1I01.19.
G. Setyono, N. Kholili, and Y. Rakhmadanu, “The Impact of Utilization The Solar-Panels With a Cooling-Water System as a Source of Micro-Power Generation,” Infotekmesin, vol. 13, no. 1, pp. 87–92, Jan. 2022, doi: 10.35970/INFOTEKMESIN.V13I1.1001.
G. Setyono, “Hydroxy Gas (HHO) Supplement of Ethanol Fuel Mixture In A Single-Cylinder Spark-Ignition Matic-Engine,” J. Mech. Eng. Mechatronics, vol. 5, no. 2, pp. 114–121, Oct. 2020, doi: 10.33021/JMEM.V5I2.1136.
G. Setyono, S. Riyadi, Muharom, O. A. W. Riyanto, and S. Pratama, “Effect of Cutting Parameter Toward The Surface Roughness Applied In Turning Tool Steel Material,” Infotekmesin, vol. 13, no. 2, pp. 233–238, Jul. 2022, doi: 10.35970/INFOTEKMESIN.V13I2.1533.
Copyright (c) 2024 Okon Agustyan Wahid, Wahyu Nugroho, Navik Kholili, Dwi Khusna, Alfi Nugroho, Mochammad Muchid
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2022 JISTI
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright aims to protect the specific way the article has been written to describe an experiment and the results. JISTI is committed to its authors protecting and defending their work and their reputation and takes allegations of infringement, plagiarism, ethical disputes, and fraud very seriously. JISTI is published under the terms of Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Authors retain the copyright and grant the journal right of first publication (online) with the work simultaneously. We use the restrictive license (non-commercial) as follows:
- BY (attribution): Users are allowed to share, distribute and redistribute the published article in any medium or format, with an identification of the authors and its initial publication in this journal. Authors are encouraged to post and distribute their articles immediately after publication (e.g., institutional or public repositories, personal websites). Authors are allowed to enter into additional contractual arrangements for the non-exclusive distribution of the published and an acknowledgement of its initial publication in this journal.
- NC (non-commercial): Users are not allowed to use the article commercially without the permission of the authors. Authors agree explicitly that the published article is indexed worldwide in databases, repositories and indexation services, even if these services operate on a commercial basis. Authors grant JISTI explicitly the right to include the published articles in databases, repositories and indexation services. You can see examples of personal and commercial use on this link.
.png)
3.png)
4.png)
2.png)
