Rancang Bangun Wind Tunnel Spesifikasi Kecepatan Angin Rendah Terhadap Intensitas Turbulensi Aliran Udara

Miftahul Ulum; M. Adie Firmansyah; Novi Indah Riani

doi:10.38156/jisti.v3i01.70

Miftahul Ulum Universitas Qomaruddin
M. Adie Firmansyah Universitas Qomaruddin
Novi Indah Riani Universitas Qomaruddin

DOI: https://doi.org/10.38156/jisti.v3i01.70

Abstract

Air flow in the view of fluid mechanics phenomena is very important to study, for this reason many researchers have carried out experiments to prove that air flow has various characteristics in aerodynamics. In this research, researchers tried to create an air flow test tool, namely the Win Tunnel with low wind capacity, which is usually referred to as subsonic, as a learning medium for measuring laboratory capacity air flow. The method used in this research is experimental, where first a Subsonic Wind Tunnel design is created that can be used as a test tool, before the test tool can be used properly. In this study, the parameters used to determine the suitability of the tool were measuring the turbulence intensity value by placing positions in the test section, namely the front, middle and back of the test section location. by using variations in inverter fan rotation at frequencies of 15 Hz, 30 Hz and 45 Hz. The results of this research obtained a Mach Number value below 0.3, which proves that the Wint Tunnel made has the correct specifications, namely subsonic. From the results of positioning in the test section to obtain turbulence intensity, the results were 11.15%, 7.83%, and 12.5% at f15 Hz, 6.54%, 2%, and 2.76% at f30 Hz, while at f45 Hz the results were 2.47%, 0.87%, and 1.67%.. The best position for placing the pitot tube is in the middle of the test section

References

G. Sihombing, “Tinjauan Strategi Dan Potensi Pemanfaatan Energi Terbarukan Bagi Negara Berkembang Di Asia Tenggara,” E-Link J. Tek. Elektro dan Inform., vol. 17, no. 1, p. 35, Jul. 2022, doi: 10.30587/E-LINK.V17I1.3916.

M. Ulum et al., “Perbandingan Aplikasi Rotor Tunggal dan Ganda terhadap Performa Turbin Air Tipe Propeller pada Saluran air Debit Rendah,” Pros. SENASTITAN Semin. Nas. Teknol. Ind. Berkelanjutan, vol. 2, no. 0, pp. 429–435, Mar. 2022, Accessed: Mar. 29, 2024. [Online]. Available: https://ejurnal.itats.ac.id/senastitan/article/view/2765.

“View of Experimental Study Of Circular Cut Off Endplate Effect On The Savonius Turbine.” https://kinematika.ulm.ac.id/index.php/kinematika/article/view/202/119 (accessed Mar. 29, 2024).

K. Yanel and A. Yanto, “Design of Low Subsonic Wind Tunnel With Open Return,” pp. 82–96, 2023, doi: 10.24853/sintek.17.2.82-96.

Ismail, E. Augupta Pane, and R. Abdu Rahman, “An open design for a low-cost open-loop subsonic wind tunnel for aerodynamic measurement and characterization,” HardwareX, vol. 12, p. e00352, Oct. 2022, doi: 10.1016/J.OHX.2022.E00352.

“(PDF) Analisis Dan Perhitungan Pada Daya Motor Untuk Terowongan Angin (Wind Tunnel) Tipe Subsonic Dengan Test Section 0,2 X 0,2 M Untuk Alat Peraga Mekanika Fluida Skala Labolatorium | Andi Tri - Academia.edu.” https://www.academia.edu/82552861/Analisis_Dan_Perhitungan_Pada_Daya_Motor_Untuk_Terowongan_Angin_Wind_Tunnel_Tipe_Subsonic_Dengan_Test_Section_0_2_X_0_2_M_Untuk_Alat_Peraga_Mekanika_Fluida_Skala_Labolatorium?uc-g-sw=105599471 (accessed Mar. 28, 2024).

“Design and Development of Low-Cost Wind Tunnel for Educational Purpose,” doi: 10.1088/1757-899X/78/1/012039.

A. A. Wicaksana, R. wibowo, and M. Kabib, “Analisa Turbulensi Honeycomb Pada Bentuk Penampang Melingkar Pada Wind Tunnel Subsonic,” J. CRANKSHAFT, vol. 3, no. 1, pp. 19–24, Aug. 2020, Accessed: Mar. 28, 2024. [Online]. Available: https://jurnal.umk.ac.id/index.php/cra/article/view/4624.

V. Aditya, A. Alchalil, A. Asnawi, and A. Rahman, “ANALISA INDIKATOR KINERJA TEROWONGAN ANGIN RANGKAIAN TERBUKA (OPEN CIRCUIT WIND TUNNEL) TIPE SUBSONIC,” Malikussaleh J. Mech. Sci. Technol., vol. 7, no. 2, pp. 120–127, Oct. 2023, doi: 10.29103/MJMST.V7I2.13658.

E. A. E. A. Mohamed, O. E. Abdellatif, and A. M. Osman, “Experimental and numerical investigation into effect of different blade configurations on performance of small-scale wind turbines,” Energy Reports, vol. 7, pp. 138–143, Sep. 2021, doi: 10.1016/j.egyr.2021.06.025.

“Fox, R. W., McDonald, A. T., & Pritchard, P. J. (2003). Introduduction to Fluid Mechanics. Toledo. - Google Search.” https://www.google.com/search?q=Fox%2C+R.+W.%2C+McDonald%2C+A.+T.%2C+%26+Pritchard%2C+P.+J.+(2003).+Introduduction+to+Fluid+Mechanics.+Toledo.&oq=Fox%2C+R.+W.%2C+McDonald%2C+A.+T.%2C+%26+Pritchard%2C+P.+J.+(2003).+Introduduction+to+Fluid+Mechanics.+Toledo.&gs_lcrp=EgZjaHJvbWUyBggAEEUYOdIBBzcwM2owajeoAgCwAgA&sourceid=chrome&ie=UTF-8 (accessed Mar. 28, 2024).

K. Yanel and A. Yanto, “Design of Low Subsonic Wind Tunnel with Open Return System for Testing Wind Turbines at Low Airspeeds,” SINTEK J. J. Ilm. Tek. Mesin, vol. 17, no. 2, pp. 82–96, Dec. 2023, doi: 10.24853/sintek.17.2.82-96.

V. Oktaviana, Y. Al Hakim, and U. Pratiwi, “Rancang Bangun Alat Ukur Kecepatan Aliran Udara Berbasis Arduino Sebagai Media Pembelajaran Fisika,” EDUSAINTEK, vol. 3, no. 0, 2019, Accessed: Mar. 28, 2024. [Online]. Available: https://prosiding.unimus.ac.id/index.php/edusaintek/article/view/289.