Rancang Bangun Rombong Listrik Dengan Menggunakan Pembangkit Listrik Tenaga Surya (PLTS) Kapasitas 200 Watt
Abstract
The solar energy that reaches the earth in one hour is sufficient to meet the energy needs of all humans on the earth's surface in one year, reason enough to spur the maximization of solar energy like renewable energy, especially by converting it into electricity by cell devices/solar panels. To get the maximum output of solar cell panel energy by optimizing the direction of the solar cell panels to the sun. The solution is to design a tracking system that adjusts the position of the solar cell panels automatically following the sun based on Arduino Uno R3. The method used is to compare the two solar cell panels using the Arduino Uno R3. tracking system and solar cell panels without a tracking system. From the two measurement results in the morning to afternoon, it was found that the panel using the tracking system had a total power output of 104.3364 Watt and the panel without a tracking system had a total power output of 43.05094 Watt, so from the results of the most optimal measurement, the panel using the tracking system. It can be seen in measurements from 09.30 WIB to 16.30 WIB solar cell panels using a tracking system produce greater energy output than solar cell panels without a tracking system, an increase in the power output compared to panels.
References
I. Made et al., “Pendampingan Teknis Pemasangan dan Perawatan Pembangkit Listrik Tenaga Surya di Desa Tablolong Nusa Tenggara Timur,” Rengganis J. Pengabdi. Masy., vol. 1, no. 2, pp. 97–107, Nov. 2021, doi: 10.29303/RENGGANIS.V1I2.89.
R. Khotama, D. B. Santoso, A. Stefanie, and S. Karawang, “Perancangan Sistem Optimasi Smart Solar Electrical pada Pembangkit Listrik Tenaga Surya (PLTS) dengan Metode Tracking Dual Axis Technology,” J. Ecotipe (Electronic, Control. Telecommun. Information, Power Eng., vol. 7, no. 2, pp. 78–84, Oct. 2020, doi: 10.33019/JURNALECOTIPE.V7I2.1887.
R. Sianipar, “Dasar Perencanaan Pembangkit Listrik Tenaga Surya,” Jetri J. Ilm. Tek. Elektro, vol. 11, no. 2, pp. 61–78, Feb. 2017, doi: 10.25105/JETRI.V11I2.1445.
M. S. Selamat Meliala, Raihan Putri, Saifuddin Saifuddin, “Perancangan Penggunan Panel Surya Kapasitas 200 WP On Grid System pada Rumah Tangga di Pedesaan.,” JET (Journal of Electrical Technology), 2020. .
J. Fahmi, J. Windarta, and A. Y. Wardaya, “Studi Awal Penerapan Distributed Generation untuk Optimalisasi PLTS Atap On Grid pada Pelanggan PLN Sistem Jawa Bali untuk Memenuhi Target EBT Nasional,” J. Energi Baru dan Terbarukan, vol. 2, no. 1, pp. 1–13, Mar. 2021, doi: 10.14710/JEBT.2021.10038.
G. Setyono, N. Kholili, and Y. Rakhmadanu, “The Impact of Utilization The Solar-Panels With a Cooling-Water System as a Source of Micro-Power Generation,” Infotekmesin, vol. 13, no. 1, pp. 87–92, Jan. 2022, doi: 10.35970/INFOTEKMESIN.V13I1.1001.
Y. Rakhmadanu, G. Setyono, and A. A. Arifin, “Pengaruh Variasi Pendinginan Terhadap Peforma Photovoltaik Kapasitas 100 WP Ddngan Variasi Sudut Kemiringan 0°, 5° dan 10°,” Pros. Semin. Nas. Sains dan Teknol. Terap., vol. 1, no. 1, pp. 391–396, Sep. 2019.
M. P. Siti Nurhabibah Hutagalung, “Protype Rangkaian Inverter Dc Ke AC 900 Watt,” Jurnal Pelita Informatika: Informasi Dan Informatika, 2017.
D. Setiawan, H. Eteruddin, and A. Arlenny, “Desain dan Analisis Inverter Satu Fasa Berbasis Arduino Menggunakan Metode SPWM,” J. Tek., vol. 13, no. 2, pp. 128–135, Oct. 2019, doi: 10.31849/TEKNIK.V13I2.3470.
C. Udayana and S. Kumara, “Peta Jalan Pengembangan PLTS Atap Menuju Bali Mandiri Energi,” 2020, doi: 10.31219/OSF.IO/83YXV.
Copyright (c) 2022 JISTI
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright aims to protect the specific way the article has been written to describe an experiment and the results. JISTI is committed to its authors protecting and defending their work and their reputation and takes allegations of infringement, plagiarism, ethical disputes, and fraud very seriously. JISTI is published under the terms of Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Authors retain the copyright and grant the journal right of first publication (online) with the work simultaneously. We use the restrictive license (non-commercial) as follows:
- BY (attribution): Users are allowed to share, distribute and redistribute the published article in any medium or format, with an identification of the authors and its initial publication in this journal. Authors are encouraged to post and distribute their articles immediately after publication (e.g., institutional or public repositories, personal websites). Authors are allowed to enter into additional contractual arrangements for the non-exclusive distribution of the published and an acknowledgement of its initial publication in this journal.
- NC (non-commercial): Users are not allowed to use the article commercially without the permission of the authors. Authors agree explicitly that the published article is indexed worldwide in databases, repositories and indexation services, even if these services operate on a commercial basis. Authors grant JISTI explicitly the right to include the published articles in databases, repositories and indexation services. You can see examples of personal and commercial use on this link.
.png)
3.png)
4.png)
2.png)
