Peningkatan Kompetensi Computer Aided Design terhadap Siswa SMK Sunan Ampel Sebagai Implementasi Teknologi Proses Pemesinan.

  • Navik Kholili Universitas Wijaya Putra
  • Gatot Setyono Universitas Wijaya Putra
  • Alfi Nugroho Universitas Wijaya Putra
  • Muharom Muharom Universitas Wijaya Putra
DOI: https://doi.org/10.38156/dimastek.v4i01.116
Keywords: peningkatan, computer aided design, siswa.

Abstract

Computer Aided Design (CAD) merupakan penggunaan perangkat lunak berbasis komputer untuk membantu pemodelan desain, analisis desain, tinjauan desain dan dokumentasi desain. Meskipun demikian, manfaat CAD dapat ditingkatkan dengan menggabungkan proses pemesinan dan proses manufaktur. Semakin rumit desain yang akan diproses pada mesin, maka perlu adanya skill tambahan untuk menerapkan CAD yang lebih detail. Pada pelatihan ini, Prodi Teknik Mesin bekerja sama dengan SMK Sunan Ampel Menganti Gresik. Peserta yang hadir pada pelatihan ini sebanyak 30 siswa. Materi pelatihan meliputi Persiapan, proses (sistematika dan langkah kerja), kualitas produk kerja, sikap/etos kerja dan Akhiran kerja. Hasil pelatihan menunjukkan bahwa penilaian tingkat persiapan sebesar 100%, proses (sistematika dan langkah kerja) sebesar 74%, kualitas produk kerja mencapai nilai 57%, sikap/etos kerja mencaai 56% dan Akhiran kerja 100%. Sehingga dari pelatihan tersebut menunjukkan bahwa minat siswa terhadap CAD untuk meningkatkan skill sangat diminati. Keberlanjutan pelatihan ini akan ditingkatkan dengan menambah bobot pelatihan materi yang diberikan kepada siswa.

References

Y. Ganin, S. Bartunov, Y. Li, E. Keller, and S. Saliceti, “Computer-Aided Design as Language,” Adv. Neural Inf. Process. Syst., vol. 34, pp. 5885–5897, Dec. 2021.

B. Regassa Hunde and A. Debebe Woldeyohannes, “Future prospects of computer-aided design (CAD) – A review from the perspective of artificial intelligence (AI), extended reality, and 3D printing,” Results Eng., vol. 14, p. 100478, Jun. 2022, doi: 10.1016/J.RINENG.2022.100478.

M. Soori and M. Asmael, “Classification of research and applications of the computer aided process planning in manufacturing systems,” Indep. J. Manag. Prod., vol. 12, no. 5, pp. 1250–1281, Jul. 2021, doi: 10.14807/IJMP.V12I5.1397.

S. Bian et al., “HG-CAD: Hierarchical Graph Learning for Material Prediction and Recommendation in Computer-Aided Design,” J. Comput. Inf. Sci. Eng., vol. 24, no. 1, Jan. 2024, doi: 10.1115/1.4063226/1166419.

E. Bassoli, S. Defanti, E. Tognoli, N. Vincenzi, and L. D. Esposti, “Design for Additive Manufacturing and for Machining in the Automotive Field,” Appl. Sci. 2021, Vol. 11, Page 7559, vol. 11, no. 16, p. 7559, Aug. 2021, doi: 10.3390/APP11167559.

P. Frohn-Sörensen, M. Geueke, T. B. Tuli, C. Kuhnhen, M. Manns, and B. Engel, “3D printed prototyping tools for flexible sheet metal drawing,” Int. J. Adv. Manuf. Technol., vol. 115, no. 7–8, pp. 2623–2637, Aug. 2021, doi: 10.1007/S00170-021-07312-Y/FIGURES/15.

K. J. Tan et al., “Implementation of additive manufacturing technologies in the design and build process of a two-seater high-performance electric vehicle,” Mater. Today Proc., vol. 70, pp. 649–654, Jan. 2022, doi: 10.1016/J.MATPR.2022.10.033.

A. Eltaief, S. Ben Amor, B. Louhichi, N. H. Alrasheedi, and A. Seibi, “Automated Assessment Tool for 3D Computer-Aided Design Models,” Appl. Sci. 2024, Vol. 14, Page 4578, vol. 14, no. 11, p. 4578, May 2024, doi: 10.3390/APP14114578.

G. Setyono, N. Kholili, and D. Khusna, “Implementasi Minyak Wijen Sebagai Bahan Bakar Alternatif Untuk Kendaraan Matic Terhadap Pelaku Bengkel Di Sambi Kerep Surabaya,” Pengabdi. Masy. dan Inov. Teknol., vol. 1, no. 02, pp. 35–39, Oct. 2022, doi: 10.38156/DIMASTEK.V1I02.30.

D. R. S. Dewi, I. Gunawan, D. Trihastuti, H. Herwinarso, M. E. Sianto, and I. J. Mulyana, “Pelatihan Identifikasi dan Analisis Pemborosan (Waste) sebagai Implementasi Lean Management di Sekolah,” Pengabdi. Masy. dan Inov. Teknol., vol. 2, no. 02, pp. 91–96, Oct. 2023, doi: 10.38156/DIMASTEK.V2I02.50.

G. Setyono, S. Siswadi, S. Riyadi, W. Nugroho, and D. Khusna, “Peningkatan Kapabilitas Proses Pemesinan Siswa SMK Wijaya Putra Dengan Implementasi Mesin CNC-Turning 2-Axis,” Pengabdi. Masy. dan Inov. Teknol., vol. 2, no. 02, pp. 97–101, Oct. 2023, doi: 10.38156/DIMASTEK.V2I02.53.

N. Kholili et al., “Pelatihan Bagi Operator Bengkel Di Surabaya Barat Dampak Emisi Dari Penggunaan Bahan Aditif Butanol-Etanol Dengan RON-90 Pada Kendaraan Bermotor,” Pengabdi. Masy. dan Inov. Teknol., vol. 3, no. 02, pp. 193–198, Nov. 2024, doi: 10.38156/DIMASTEK.V3I02.95.

M. S. Gunawan et al., “Pelatihan Dan Pengenalan Kepada Siswa Sma Negeri Surabaya Barat Tentang Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak Menggunakan Sistem Pirolisis Kapasitas 10 Liter,” Pengabdi. Masy. dan Inov. Teknol., vol. 3, no. 02, pp. 188–192, Nov. 2024, doi: 10.38156/DIMASTEK.V3I02.96.

Published
2025-04-28
Issue
Vol 4 No 01 (2025): April 2025
Section
Articles

Copyright (c) 2025 Navik Kholili, Gatot Setyono, Alfi Nugroho, Muharom Muharom

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2022 DIMASTEK

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright aims to protect the specific way the article has been written to describe an experiment and the results. DIMASTEK is committed to its authors protecting and defending their work and their reputation and takes allegations of infringement, plagiarism, ethical disputes, and fraud very seriously. DIMASTEK is published under the terms of Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Authors retain the copyright and grant the journal the right of first publication (online) with the work simultaneously. We use the restrictive license (non-commercial) as follows:

  • BY (attribution): Users are allowed to share, distribute and redistribute the published article in any medium or format, with an identification of the authors and its initial publication in this journal. Authors are encouraged to post and distribute their articles immediately after publication (e.g., institutional or public repositories, personal websites). Authors are allowed to enter into additional contractual arrangements for the non-exclusive distribution of the published and an acknowledgement of its initial publication in this journal.
  • NC (non-commercial): Users are not allowed to use the article commercially without the permission of the authors. Authors agree explicitly that the published article is indexed worldwide in databases, repositories and indexation services, even if these services operate on a commercial basis. Authors grant DIMASTEK explicitly the right to include the published articles in databases, repositories and indexation services. You can see examples of personal and commercial use on this link.