Rancang Bangun Vertical Axis Wind Turbine (VAWT) Dengan Pendekatan Metode Ergonomic Function Deployment (EFD)

  • Agung Setyawan
  • Ong Andre Wahyu Riyanto Universitas Wijaya Putra
  • Slamet Riyadi Universitas Wijaya Putra
  • Ampar Jaya Suwondo Universitas Wijaya Putra
  • Onny Purnamayudhia Universitas Wijaya Putra
DOI: https://doi.org/10.38156/jisti.v2i02.54

Abstract

VAWT adalah turbin angin sumbu vertikal yang gerakan poros dan rotornya sejajar dengan arah angin. Sehingga VAWT dapat bergerak tanpa bergantung pada arah angin. Selain itu VAWT juga dapat bergerak pada kecepatan angin rendah dan menghasilkan listrik karena VAWT memiliki torsi yang tinggi. Tujuan dari penelitian ini adalah VAWT dirancang dengan menggunakan Metode Ergonomic Function Deployment dengan menggunakan tabel House of Ergonomic. Hasil penelitian didapatkan sebuah rancangan VAWT yang ergonomis dengan menggunakan 6 sudu dengan skala pipa paralon 8 dim setelah melalui screening dan selecting concept pada table morphological chart.

References

Junaidin, B. (2017). Perancangan Vertical Axis Wind Turbine (VAWT) Skala Kecil. J.Ilm. Bid. Teknol. ANGKASA, 9(2), 10.

Lianda, J., & Zulkifli, Z. (2016, November). Rancang Bangun Vertical Wind Axis Turbin (VWAT) Dua Tingkat. In Seminar Nasional Teknologi Informasi Komunikasi dan Industri.

LIANSARI, G. P., FEBRIANTI, A., & GT, P. A. T. (2018). Usulan Rancangan House Of Ergonomic (Hoe) Produk Interior Toilet Gerbong Kereta Penumpang Kelas Ekonomi Menggunakan Metode Ergonomic Function Deployment (Efd). Penelitian dan Aplikasi Sistem dan Teknik Industri, 12(1), 328395.

Maulana, Y., & Sidiq, A. Perancangan Vertical Axis Wind Turbine (Vawt) Jenis Straight Blade.

Maulana, Y., & Astuti, K. Y. (2019). Studi Eksperimen Turbin Angin Bersumbu Vertikal Untuk Pju (Penerangan Jalan Umum). Prosiding Hasil-Hasil Penelitian Tahun 2019 Dosen-Dosen Universitas Islam Kalimantan.

Nakhoda, Y. I., & Saleh, C. (2017). Rancang Bangun Pembangkit Listrik Skala Kecil Menggunakan Kincir Angin Sumbu Vertikal Lenz2 Portabel. Prosiding SENIATI, B70-1.

Saputra, M., Kurniawan, R., & Munawir, A. (2019). Rancang Bangun Turbin Angin Skala Kecil Untuk Kawasan Kampus Univ. Teuku Umar. Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi, 5(1).

Sumarno, F. G., Margana, M., Devi, B. M., Meitanti, D., & Rizaldy, D. (2020, December). Studi Karakteristik Turbin Angin Savonius Bertingkat Dengan Sudut 120 Sebagai Pembangkit Listrik Alternatif. In Prosiding Seminar Nasional NCIET (Vol. 1, No. 1, pp. 359-373).

Syahyuniar, R., Ningsih, Y., & Herianto, H. (2018). Rancang Bangun Blade Turbin Angin Tipe Horizontal. Elemen: Jurnal Teknik Mesin, 5(1), 28-34.

Published
2023-10-12
Issue
Vol 2 No 02 (2023): Oktober 2023
Section
Articles

Copyright (c) 2023 Agung Setyawan, Ong Andre Wahyu Riyanto, Slamet Riyadi, Ampar Jaya Suwondo, Onny Purnamayudhia

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2022 JISTI 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright aims to protect the specific way the article has been written to describe an experiment and the results. JISTI is committed to its authors protecting and defending their work and their reputation and takes allegations of infringement, plagiarism, ethical disputes, and fraud very seriously. JISTI is published under the terms of Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Authors retain the copyright and grant the journal right of first publication (online) with the work simultaneously. We use the restrictive license (non-commercial) as follows:

  • BY (attribution): Users are allowed to share, distribute and redistribute the published article in any medium or format, with an identification of the authors and its initial publication in this journal. Authors are encouraged to post and distribute their articles immediately after publication (e.g., institutional or public repositories, personal websites). Authors are allowed to enter into additional contractual arrangements for the non-exclusive distribution of the published and an acknowledgement of its initial publication in this journal.
  • NC (non-commercial): Users are not allowed to use the article commercially without the permission of the authors. Authors agree explicitly that the published article is indexed worldwide in databases, repositories and indexation services, even if these services operate on a commercial basis. Authors grant JISTI explicitly the right to include the published articles in databases, repositories and indexation services. You can see examples of personal and commercial use on this link.